Accutron Pro Series

Advanced ultrasonic airflow monitor.

Accutron Pro Series is an ultrasonic time-of-flight airflow monitor that seamlessly connects to any Modbus RTU device for advanced air quality monitoring. 

Pro Series advanced ultrasonic airflow monitor
Pro Series advanced ultrasonic airflow monitor

Features

Accurate

Bi-directional readings, cross sectional velocity averaging measurements, superior to single point measurement.

Reliable

Designed to perform in extreme noise, high and low velocity applications, the Pro Series provides competent readings that do not drift.

Robust

Rugged design and non corrosive (not affected by temperature, humidity, pressure, salt or dust).

Simple Installation

Easy configuration and quick installation reduces project costs and start-up times.

Maintenance free

No moving parts and virtually no calibration.

Specifications

Communication Options

Modbus TCP, Modbus RTU, EtherNet/IP, 4-20mA Outputs (x2)
Optional: ProfiNet, 4-20mA Outputs (x4)

Network Capabilities

PoE
Optional: Wifi, Lte

Power In

20-40 VDC, Optional: 110-240 VAC
48V IEEE 802.3af, mode A&B compatible

Enclosure

Non-corrosive IP66
NEMA 4X with lock hinges

Transducers

Drift/Tunnel: 1m (3.3ft) min to 18m (59ft) max
Fan: 1m (3.3ft) min to 13m (42.6ft) max
IDM: 0.25m (0.8ft) min to 2.5m (8.2ft) max
Long Range: 6m (19.7ft) to 35.5m (116.5ft) max

Transducer Models

The Accutron Pro Series offers four sensor types for multiple airflow monitoring applications.
ultrasonic airflow sensor for drifts and tunnels

Drift / Tunnel Sensor

Used for ramps, drifts, travel ways, shafts, tunnels and raises. The Pro Series Drift sensor features a tap-on laser alignment for easy installation. It also has a tilt alarm for when a sensor is bumped out of place and a built in sensor status heartbeat LED.

IDM ultrasonic airflow sensor for ducts

IDM Duct Sensor

Used for auxiliary ventilation for fan and ducts. The ball and socket design allows for easy alignment and quick installation with square or rounded ducting. It is easily removable for maintenance cleaning and has a built-in sensor heartbeat LED.

Mine Fan ultrasonic airflow sensor

Fan Sensor

Used for surface intake and exhaust fans. The Fan sensor features a ball and socket design for easy alignment and removal for maintenance cleaning intervals in applications involving buildup. It also features a built in sensor heartbeat LED.

Long range ultrasonic airflow sensor

Long Range Sensor

Used for roads, tunnels, salt mines, room and pillar. It's designed for long distance runs, wide tunnels and large cross-sectional areas. It features a tap-on laser alignment, tilt alarm for when a sensor is bumped out of place and a built in sensor heartbeat LED.

Pro Series Software

Never miss a reading, never get a spike. The Pro web interface allows users to easily manage and configure devices. Our Accutron Digital Signal Processing (DSP) provides advanced J-Filter noise discrimination. Further our Pro Series sensors suppress other background interferences so you can be confident in your airflow readings. 

Pro Series ultrasonic airflow monitoring software
Pro Series ultrasonic Sensors and cables

Designed for the User

The Pro Series uses patented transducer designs for quicker install times with features such as the tap-on laser alignment function, daisy chained sensors, and on-board diagnostics. Further features such as the tilt-alarm function for sensor misalignment warnings and sensor orientation allows users to confidently verify installs and settings from anywhere on the network. The Pro Series dynamically calculates face to face for accurate measurement setup. 

Air Quality AccuBus

The Pro Series AccuBus connects up to 16 Modbus sensors all daisy chained to the Pro Series. Connect sensors to provide temperature, pressure, humidity, heat stress, gas and more to the Pro Series for a full mine air quality information (see MAQS for popular configurations). Accutron sensors come with quick M12 connectors for quick and easy installations. Cable splitters allow for various sensor configurations saving you on excess cable lengths. Cables come in lengths of 5m, 10m, 15m, 20m, 30m, and 60m for a variety of applications. 

Pro Series advanced ultrasonic airflow monitor MAQS

Get a Personalized Quote

Contact us for more information, product pricing and advice on the best solution for your application. 

Products of Interest

Mine Air Quality Station

Intrinsically Safe Airflow Monitor

Industrial LED Display